Dismantling Session #8 - 9-22-13

Tackling the fan/pulley and radiator removal along with the upper and lower charcoal canisters from the US spec Air pollution kit. The fan/pulley is the round silvery thing on the front of the engine. The canisters are the round black items with the little red tip on top. Those will not be going back in the car. Good thing as for two seeming easy little items they were a bit of a pain to remove due to the placement of the holding clamps. Nonetheless this gets me the front end clearance to pull the engine. Still have a lot to disconnect before I do that but big step out of the way.

Before fan/pulley and canister removal...

After fan/pulley and canister removal...

After the radiator removal. Note that the thing that looks like a radiator is the AC cooling tower. That will be coming out as well.